![]() 12197 of Federal Standard 595) or Scarlet Munsel 7.5, Red 6/10 and shall meet the following requirements in Table 160. The coating shall be International Orange in color (Color No. The coating for the plastic foam shall be a liquid elastomeric vinyl compound. The complete body strap assembly shall have a minimum breaking strength of 360 pounds. Dee ring, o-ring, slide adjuster and snap hook ends shall be welded or brazed, or they may be a one-piece casting. Snap hook springs shall be phosphor bronze or other suitable corrosion-resistant material. Steel hardware, protected against corrosion by plating, is not acceptable. All hardware shall be brass, bronze, or stainless steel, and of the approximate size indicated by the drawings. This webbing shall be treated with a mildew-inhibitor of the type specified in paragraph (e) of this section. This webbing shall be 1-inch cotton webbing meeting the requirements of Specification MIL-W-530 for Type IIb webbing. This webbing shall be 1-inch wide nylon webbing in accordance with the requirements of Specification MIL-W-17337. 12197 of Federal Standard 595) or Scarlet Munsel 7.5, Red 6/10 and shall meet the following requirements in Table 160.055-3(j): (1) Nylon webbing. ![]() In the late 1800íthe founders of Flexsteel. Another type of spring system is the Flexsteel blue ribcage spring system. Webbing and solid panels can also be used as the deck for top cushions instead of springs. ![]() This webbing shall be 1-inch cotton webbing meeting the requirements of Specification MIL-W-530 for Type IIb webbing. Webbing, which traditionally consisted of linen or jute band assembly, has now been largely replaced by synthetic webbing materials. There are no restrictions as to color, but the fastness of the color to laundering, water, crocking, and light shall be rated good when tested in accordance with Federal Test Method Standard No.
0 Comments
Leave a Reply. |